PIG® Grippy® Adhesive-Backed Floor Mat with Safety Borders
- Call attention to hazards and provide a no-slip path for foot traffic with our highly visible, super-safe, adhesive-backed absorbent runner - yellow and black pattern runs down both edges of mat roll, helping to indicate hazards and boost safety
- Adhesive-backed floor mat stays exactly where you put it with no shifting, bunching up or flipping over; traps dirt, salt and moisture to keep it from being tracked around. Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily - will stick to most common commercial floor surfaces, including: concrete, vinyl tile, ceramic tile, quarry tile and linoleum
- Extreme durability that stands up to heavy traffic — even forklifts — stays in place for up to 3 to 6 months, depending on conditions and traffic patterns; has a 91% LOWER environmental impact than rental floor mats. (Full report published in English only and available on request)
- Easy to use: roll out continuous coverage with no gaps, ripples or overlaps that cause slips and trips
- Easy to clean: sweep, vacuum, mop, use a shop/wet vac or run a floor scrubber over it and it won’t budge. (cleaning helps to restore hi-viz properties of safety border)
- Easy to customise: lets you create custom-size floor mats that promote the safest path, even around corners. Mat goes down easier with these <a href=https://www.newpig.nl/product-categories/absorbents/adhesive-backed-mats/pig-grippy-floor-mat/pig-grippy-floor-mat-installation-tools.html> custom tools.</a>
| Item Number | Product Name | Dimensions | Details | Unit |
|---|---|---|---|---|
| GRPSB36200 | PIG® Grippy® Adhesive-Backed Floor Mat with Safety Borders | 91 cm W x 30 m L | Absorbs 30 L/Roll | 1 Roll |
| GRPSB36201 | PIG® Grippy® Adhesive-Backed Floor Mat with Safety Borders | 91 cm W x 15,2 m L | Absorbs 15 L/Roll | 1 Roll |
Material Safety Data Sheet
Product Data Sheet
Chemical Compatibility Guide
Certifications & Approvals
- DIN 51130:2014 – R13
- PIG Grippy Floor Mat classified as slip resistance R13 according to DIN51130 - suitable for use on floors in workrooms and work areas where there is increased risk of slipping due to grease, oil, water, foods, left-overs, dust, flour, paint clippings etc.
- BS7976-2:2002+A1:2103 - low slip
- Tested in accordance with BS 7976-2:2002+A1:2013, and demonstrated low slip potential in both wet and dry conditions
- BS EN 13501-1:2007+A1:2009 - Bfl-s1
- Fire classification Bfl-s1 when tested according to BS EN 13501-1
- NFSI Certified
- When used as part of your floor safety program, high-traction surfaces such as PIG Grippy Floor Mat have been proven to reduce slip-and-fall claims by as much as 90%.
- ASTM G154-1
- When tested using ASTM G154-1 for UV and weathering, there is no fading, degradation or loss of strength when exposed to the equivalent of 1 year.
Product Questions
Customer Questions